A revista Robótica é parceira da SPR

Home
Noticias recentes da SPR

Atenção, abrirá numa nova janela. PDFVersão para impressãoEnviar por E-mail

Já são conhecidos os vencedores dos prémios SPR relativos a trabalhos concluídos em 2019.

O Prémio da Melhor Tese de Doutoramento nacional em Robótica foi atribuído ao trabalho:

Título: “Globally Convergent Simultaneous Localization and Mapping: Design Techniques, Analysis, and Implementation”

Autor: Pedro António Duarte Marques Lourenço (Universidade de Lisboa - IST)

Orientadores: Prof. Paulo Jorge Coelho Ramalho Oliveira, Prof. Pedro Tiago Martins Batista e Prof. Carlos Jorge Ferreira Silvestre

Este ano houve 2 candidaturas e a seleção do vencedor foi realizada por um Júri constituído pelos Prof. Alexandru Stancu (Lecturer at the Department of Electrical and Electronic Engineering, University of Manchester), Prof. Enric Cervera (Associate Professor at the Department of Computer Science and Engineering, Universitat Jaume I) e Prof. Giovanni Muscato (Full Professor at the Dipartimento di Ingegneria Elettrica Elettronica e Informatica, University of Catania).

O Prémio da Melhor Dissertação de Mestrado nacional em Robótica, por decisão unânime do júri, foi atribuído ao trabalho:

Título: “Distributed Formation Control of Double-Integrator Vehicles in the Presence of Unknown Constant Disturbances”

Autor: Pedro Miguel Dias Trindade (IST)

Orientadores: Prof. Rita Maria Mendes de Almeida Correia da Cunha, Prof. Pedro Tiago Martins Batista.

Adicionalmente, foi ainda decidido atribuir uma menção honrosa ao trabalho:

Título: “Odometria visual monocular em robôs para a agricultura com camara(s) com lentes "olho de peixe"”

Autor: André Silva Pinto de Aguiar (FEUP)

Orientadores: Prof. Armando Jorge Sousa, Doutor Filipe Neves dos Santos.

Este ano houve 6 candidaturas e a seleção do vencedor foi realizada por um Júri constituído pela Prof. Ana Cristina Lopes (Instituto Politécnico de Tomar), Prof. Cristiano Premebida Universidade de Coimbra), Prof. Lino Marques (Universidade de Coimbra), Prof. Luís Conde Bento (Instituto Politécnico de Leiria) e Prof. Pedro Santana (ISCTE – Instituto Universitário de Lisboa).

Por último, o Prémio SPR Inovação e Transferência de Tecnologia na área da Robótica foi atribuído ao Projeto:

Nome: HORSE FLEXCoating

Empresa: Flupol Surface Engineering S.A.

Instituição I&D: INESC TEC

Este ano houve 2 candidaturas e a seleção do vencedor foi realizada por um Júri constituído pelos Prof. Paulo Gonçalves (Instituto Politécnico de Castelo Branco), Eng. Nuno Saraiva (SEW-EURODRIVE PORTUGAL, Lda.) e Eng. Rodrigo Maia (Altran Technologies, SA).

A SPR saúda todos os candidatos pelos trabalhos submetidos, apresentando uma felicitação especial aos vencedores dos vários prémios, e agradece publicamente o trabalho de todos os elementos dos vários júris.

 

Atenção, abrirá numa nova janela. PDFVersão para impressãoEnviar por E-mail

Numa parceria entre a SPR e a revista científica internacional Industrial Robot – The international journal of robotics research and application, o Editorial Board desta revista atribuiu prémios aos melhores artigos submetidos e apresentados na conferência ICARSC’2020 e que se enquadram na área de publicação desta revista.

Fica aqui a lista de premiados e a justificação do Dr. Clive Loughlin, Editor da revista, para a atribuição de cada um dos prémios:

“I was very pleased and impressed to see such a high standard of contributions for the conference. This made selection of a winner and highly commended awards a challenging pleasure.

This year I have selected three papers to receive our Highly Commended Award and two that jointly receive our Winning Paper Award. We welcome contributions from all authors at all times, but these authors are particularly encouraged to submit updated and/or extended versions of their papers for consideration by the journal.

In numerical order the Highly Commended awards go to:

Assist-as-needed Impedance Control Strategy for a Wearable Ankle Orthosis

Autores: João M. Lopes, Cristiana Pinheiro, Joana Figueiredo, Luís P. Reis and Cristina P. Santos

This paper uses adaptive impedance control to vary the human-robot interaction stiffness and assistance for ankle and gait rehabilitation. I particularly like the practicality of the approach and its considered use of assistance and resistance.

The second Highly Commended Award goes to:

Towards a Cooperative Robotic Platooning Testbed

Autores: Enio Vasconcelos Filho, Nuno Guedes, Bruno Vieira, Miguel Mestre, Ricardo Severino, Bruno Gonçalves, Anis Koubaa and Eduardo Tovar

Although the use of simulation is very powerful for allowing the testing of basic ideas it is only when those idea can be tested in the real-world that they actually become useful. The mobile robot testbed designed and validated in this paper provides a very useful and affordable half-way step for projects wanting to transition from simulation to a real application.

The third and final Highly Commended Award goes to:

2D Visual Servoing meets Rapidly-exploring Random Trees for collision avoidance

Autores: Miguel Nascimento, Pedro Vicente, and Alexandre Bernardino

It is essential that robots can accommodate the variations and uncertainties of the real-world. This work uses image-based 3D visual servoing to correct and refine open-loop trajectories to empower the robot to grasp objects successfully.

This year we have two Winning papers and these are (in numerical order):

The first winning award goes to:

Enhanced Performance Real-Time Industrial Robot Programming by Demonstration using Stereoscopic Vision and an IMU sensor

Autores: Vítor H. Pinto, António Amorim, Luís Rocha and António P. Moreira

Many industrial tasks such as spray painting and polishing, rely of the skill of a human operator to achieve the required quality and finish. These skills can take years to acquire. If a robot is to replicate the performance it needs to be taught by the skilled operator who is unlikely to have advanced robot programming knowledge. The programming-by-demonstration techniques demonstrated in this paper provide a highly practical solution to this problem using 6D Mimic sensor with an IMU sensor.

The second winning award goes to:

GEOMOVE: Detached AGVs for Cooperative Transportation of Large and Heavy Loads in the Aeronautic Industry

Autores: Carlos Rizzo, Angel Lagraña and Daniel Serrano

As automation equipment gets larger it also becomes more specialized. If instead it is possible to have multiple smaller pieces of equipment working together collaboratively, to perform the same task, then they can be more versatile and capable of being employed in a wider variety of applications. This paper links industrial AGVs to perform collaborative tasks in a closely coordinated manner so they can undertake tasks beyond the capabilities of a single AGV working on its own.

These two papers present highly practical work that addresses real industrial needs and for this reason they both receive our Best Paper Award.”

De referir que a escolha dos trabalhos vencedores ficou a cargo do Editorial Board da revista Industrial Robot.

A SPR felicita os autores dos vários trabalhos premiados pela excelência do trabalho desenvolvido.

 

Atenção, abrirá numa nova janela. PDFVersão para impressãoEnviar por E-mail

 

O Best Paper Award da Conferência ICARSC’2020 - 20th IEEE International Conference on Autonomous Robot Systems and Competitions foi atribuído ao trabalho “Assist-as-needed Impedance Control Strategy for a Wearable Ankle Robotic Orthosis”, cujos autores são João M. Lopes, Cristiana Pinheiro, Joana Figueiredo, Luís P. Reis e Cristina P. Santos.

 

A escolha do trabalho vencedor do Best Paper Award ficou a cargo do Steering Committee da ICARCS’2020, a quem a SPR agradece todo o trabalho desenvolvido na análise dos vários trabalhos candidatos ao prémio tendo em vista a seleção do vencedor.
A SPR felicita ainda os autores pela excelência do trabalho desenvolvido.
   

Atenção, abrirá numa nova janela. PDFVersão para impressãoEnviar por E-mail

 

Teve lugar nos dias 15 e 16 de abril a conferência ICARSC 2020 que, devido à atual situação provocada pela pandemia da COVI-19, decorreu online.

Apesar das "adaptações" que foi necessário fazer à conferência, esta apresentou um sucesso assinalável. Todas as apresentações foram realizadas (não houve um único no-show!) e a assistência média às sessões situou-se acima dos 60 participantes, com sessões com mais de 80 participantes.

Esta edição contou com duas Keynote Talks, proferidas pelo Professor António Pascoal, professor no Instituto Superior Técnico, tendo por tema “Exploring the Blue Frontier with Cooperative Marine Robots: Theory and Practice”, e pelo Professor Jan Peters, professor da Technische Universitaet Darmstadt, com o tema “Towards Robot Skill Learning”.

De realçar a decisão que a Sociedade Portuguesa de Robótica tomou em tornar a assistência às sessões abertas gratuitamente a todos os interessados. Esta opção possibilitou que alunos de diversas instituições de ensino superior assistissem às sessões e, além disso, foi ainda registada a presença nas sessões de vários membros do Comité Científico da conferência que numa situação normal não teriam estado presentes, por razões inerentes às necessárias deslocações dos seus países de origem.

A SPR agradece a todos os que tornaram possível o evento, nomeadamente General / Program Chairs, membros do Steering Committee, membros da Comissão Científica, membros da Comissão Organizadora, o fantástico trabalho que desenvolveram para ser possível alcançar este resultado.

 

Atenção, abrirá numa nova janela. PDFVersão para impressãoEnviar por E-mail

 

Construção de robôs

Como apoio aos participantes do Festival Nacional de Robótica, são disponibilizadas algumas ferramentas e manuais qua auxiliam a construção dos robôs para as provas First Challenger e Robot@Factory Lite.

First Challenger

A prova First Challenger....

 

 

 

 

 

 

 

 

 

 

 

 

Robot@Factory Lite

A prova Robot@Factory Lite....

   

Pág. 3 de 16